Utilizziamo cookie per assicurarti una migliore esperienza sul sito. Utilizziamo cookie di parti terze per inviarti messaggi promozionali personalizzati. Per maggiori informazioni sui cookie e sulla loro disabilitazione consulta la Cookie Policy. Se prosegui nella navigazione acconsenti all’utilizzo dei cookie.
 

AMOTHERM STEEL TOP WB

Protective water-based acrylic topcoat for intumescent coatings on steel

Water-based acrylic topcoat specifically designed for decorating and protecting AMOTHERM STEEL WB intumescent paint coatings used for the fire-protection of steel structures.

 
CARATTERISTICHE E MODALITÁ D’USO
Pennello
Spruzzo
Base Acqua
 
 
Informazioni sul prodotto

Technical features

  • Makes the film resistant to condensation in indoor environments
  • Ideal to provide a coloured finish to the intumescent paint applied
  • Available in different RAL or NCS shades
  • Little odour and low content of volatile organic compounds
  • Single component

Applications 

The ideal solution for decorating and protecting AMOTHERM STEEL WB intumescent paint coatings located in indoor environments. Recommended for use in closed environments where it is not possible to use solvent-based products.

 

Drying time

  • 1 – 2 hours at surface
  • 12 – 24 hours at depth

 

Consumption

120 g/m 2 (100μm of wet film, 50μm of dry film)

Recommended treatments

  • Interior:
    • 1 x Amotherm Steel Primer Epoxy SB on galvanised structures / 1x Amotherm Steel Primer WB on black iron
    • Amotherm Steel WB in multiple coats to reach the prescribed quantity
    • 1 x Amotherm Steel Top WB (optional for coloured finishes)

 

Packaging 

5 – 10 Kg

 

Certifications 

Certified for the purposes of European technical assessment ETA 14 / 0417

 
 
Documenti
DOWNLOADS TDS
 
Scheda Sicurezza e Certificati


 
 
 
Richiedi Informazioni
  • Privacy Policy
  • This field is for validation purposes and should be left unchanged.