AMOTHERM CONCRETE WB
Single-component water-based paint for fire-protection of reinforced concrete structures
An intumescent fire-proofing system for fire-protection of reinforced and pre-stressed reinforced concrete elements. Its action limits heat spreading to the inner reinforcement creating a protective barrier against fire without altering the look of the element and without adding weight to the geometry of the structural element to which it is applied. Ideal for interior use.
CHARACTERISTICS AND APPLICATION
Brushing
Spraying
Roller
water base
Product information
Technical features
- Once in place it looks like a normal water-based paint
- It does not alter the aesthetics of the element
- Easy to use
- It does not add weight to the geometry of the structural element to which it is applied
- For interior use
- A very slight initial odour and odourless once dry
Applications
Specifically designed for fire-protection of reinforced and pre-stressed concrete structural and compartmentalising elements and floors in masonry-concrete mix.
Drying time
- 6 – 12 hours at surface
- 24 – 48 hours at depth
Consumption
Depends on the element to be protected and the technical performance required
Recommended treatments
- 1 x Amotherm Brick Primer WB
- Amotherm Concrete WB multiple coats
- 1 x Amotherm Brick Top WB for colours other than white
Packaging
5 – 10 – 20 Kg
Certifications
Rated according to EN 13501 – 2 – Tested according to EN 13381 – 3 of 2002 – Tested according to UNIEN 1363 – 1 of 2012
Find out more about ETHIC GREEN project
Documents
DOWNLOADS TDS
Scheda tecnica
Brochure Amonn
Brochure Amonn
SAFETY DATA SHEET AND CERTIFICATES
Contact
