We use cookies to offer the best possible user experience on our website. We also use third-party cookies, to deliver personalised advertisement messages. By using our website you agree, that cookies can be saved on your device. Further information on the cookies used and on how to disable them can be found here.
 
 
J.F. AMONN Srl

Amotherm Brick WB

Single-component water-based paint for fire-protection of brickwork walls and floors in masonry-concrete mix

Easy to use and safe - An intumescent fire-proofing system for fire-protection of brickwork elements. Easy to apply, once in place it looks like a normal water-based paint, it does not alter the look of the items nor add weight to the geometry of the structural element to which it is applied. Ideal for interior use.
CHARACTERISTICS AND APPLICATION
Brushing
Rolling
Spraying
Water based
 
 
 
Product information

Technical features

  •  Once in place it looks like a normal water-based paint
  • It does not alter the aesthetics of the element
  • Easy to use
  • It does not add weight to the geometry of the structural element to which it is applied
  • For interior use
  • A very slight initial odour, odourless once dry


Applications

Specifically designed for fire-protection of brickwork compartmentalising elements. Can be applied directly to non-plastered brickwork.

Drying time

  • 6 – 12 hours at surface
  • 24 – 48 hours at depth


Consumption
Depends on the element to be protected and the technical performance required

Recommended treatments
1 x Amotherm Brick Primer WB
Amotherm Brick WB multiple coats
1 x Amotherm Brick Top WB for colours other than white


Packaging
5 – 10 – 20 Kg

Certifications
- Rated according to UNIEN 1364 – 1 of 2002 and UNI EN 1363 – 1 of 2001
 
 
Documents
Downloads
 
  Technical data sheet
 
 
 
functional specification modules
AMOTHERM BRICK WB

Supply and application of Amotherm Brick WB water-based intumescent paint for protecting brick walls from fire as required by the standards UNI EN 1364-1:2002 and UNI EN 1363-1:2001.
The fire proofing treatment must be carried out by spraying, brushing, using a roller or with an airless pump, applied at any height, either vertically or horizontally and/or at any angle.

The preparation of the under-surface will vary depending on the type of surface to be treated. More specifically:

• new brickwork must be cleaned of any impurities and treated with Amotherm Brick Primer WB.
• existing brickwork with old paint must be thoroughly cleaned to eliminate any paint residues that are not perfectly bonded to the surface, and then treated with Amotherm Brick Primer WB.

The quantity of intumescent paint to be applied to the walls to be protected will depend on:

• the fire-resistance class EI
• the wall section (stratigraphy, composition)

For indoor applications, where there is damp and heavy condensation, we recommend applying Amotherm Brick Top WB acrylic topcoat.
Intumescent paint with environmental certification EPD according to ISO EN 14025 and EN UNI 15804 (environmental label type III) as required by Article 34 of the new Public Contracts Code defined by Legislative Decree No. 50 of 18-04-2016 and updated by Legislative Decree No. 56 dated 19-04-2017.

Guideline costs of materials and application (excluding scaffolding and any preparation of the surface):
• Amotherm Brick Primer WB: € 4,00/m2 (100 g/m2)
• Amotherm Brick WB paint: € 15,00/m2 (1kg/m2)

 
Download application specifications in PDF format
 
 
 
 
 
 

Similar products

Similar products text